REHAU Artevo: Profile System, Features and Uses of the Premium uPVC Window
7 minutes read
REHAU Artevo is a premium uPVC window system with 80 mm frame depth and a centre seal, launched by REHAU on 1 July 2023. Its particular features are the fibre-reinforced RAU-FIPRO X material, which largely dispenses with steel reinforcement, Uf-values down to 0.81 W/(m²K) in the LowE version, and up to 75% recycled content in the profiles. The system is aimed at clients who want to combine high insulation values with large, slim sashes.
Artevo at a glance
| Feature | REHAU Artevo |
|---|---|
| Market launch | 1 July 2023 |
| Frame depth | 80 mm (platform shared with Synego AD and MD) |
| Seal | centre seal, 3 seal levels |
| Chambers | 7 (according to a dealer) |
| Uf-value | down to 0.81 W/(m²K) with LowE technology |
| Glazing | up to 56 mm offset, up to 72 mm flush |
| Sound insulation | up to 48 dB |
| Reinforcement | RAU-FIPRO X, largely without steel |
| Sash height | up to 2.80 m (white and coloured); slim sash up to 2.60 m |
| Meeting stile | 118 mm (slim) or 156 mm (standard) |
| Recycled content | up to 75% in the profiles, for the first time also in glazing beads |
Sources: REHAU product page and trade press on the market launch (as of September 2026).
RAU-FIPRO X: stability without steel
Classic uPVC windows get their stiffness from steel sections in the chambers. Steel, however, conducts heat and makes the window heavy. With Artevo, REHAU relies on RAU-FIPRO X, a glass-fibre-reinforced material that acts across the entire profile cross-section. According to the manufacturer, elements without steel reinforcement are up to 40% lighter than classic uPVC windows. For special cases – very tall sashes or coupled sashes, for example – a universal reinforcement is available.
According to trade press at the launch, sash heights up to 2.80 m are possible with steel reinforcement, and up to 2.40 m with LowE foil instead of steel. The basics of reinforcement are explained in the article Steel reinforcement in the uPVC window.
Artevo max and LowE technology
The Artevo max version uses a LowE foil integrated into the profile at the factory. According to REHAU, it reduces heat radiation inside the chambers to 5% and prevents convection – much like a low-E coating on insulating glass. The result:
- Uf-values down to 0.81 W/(m²K)
- Passivhaus certification by the Passivhaus Institut Darmstadt
- compliance with Swiss requirements under Minergie-P
- no additional foam insulation needed; the foil is, according to REHAU, recyclable
For Passivhaus projects, Artevo max is therefore an alternative to 88 mm systems – with less frame depth. More on Passivhaus certification in the article Passivhaus windows.
Design: flush and slim
Besides the classic offset sash, Artevo also offers a flush sash, where frame and sash lie in one plane on the outside. This look recalls timber windows and is in demand in modern architecture. The flush variant takes glazing up to 72 mm – unusually much for a uPVC system.
With a meeting stile of 118 mm in the slim version (standard 156 mm), the view of double-sash windows becomes much slimmer. For surfaces, REHAU points to its KALEIDO COLOR programme with over 2,000 design options. The benefit of slim sightlines is explained in the article Slim face widths.
Sustainability
REHAU names three building blocks:
- Recycled content: up to 75% recycled material in the profiles, for the first time also in the glazing beads
- Window.ID: a marking system intended to support material return over the life cycle
- EcoPuls: REHAU's own sustainability label
REHAU is also listed among the system suppliers with the RAL quality mark under RAL-GZ 716.
Funding and requirements
When replacing windows in residential buildings in Germany, the GEG requires Uw ≤ 1.3 W/(m²K); for BAFA individual-measure funding, Uw ≤ 0.95 W/(m²K) applies. The basic funding rate is 15%; according to BAFA, the 5% iSFP bonus applies only from €30,000 of eligible minimum investment for one residential unit (as of September 2026). With Artevo and triple glazing, the funding threshold is generally easy to reach; the LowE version provides additional reserve. These are German rules; in the UK or elsewhere, check the local thermal limits and funding schemes.
One platform with Synego
According to REHAU, Artevo shares the 80 mm platform with the Synego AD and Synego MD systems. For window makers that means shared accessories and established fabrication processes; for clients, that Artevo windows can be combined in projects where other areas are fitted with Synego. The differences lie in the material, the sash geometry and the design options.
Light sashes in practice
The lower weight without steel reinforcement has practical consequences: large sashes are easier to operate, hardware is less stressed, and transport and installation are easier. At the same time, steel as a thermal bridge in the profile is eliminated. It is important, though, that window makers follow REHAU's fabrication guidelines exactly – on glass bonding, for example, which with fibre-reinforced profiles often contributes to the overall stiffness of the sash. When you get a quote, ask whether the sashes are bonded and which dimensions are approved without steel.
Care
As with all uPVC windows, mild cleaning agents are enough for the profiles. Seals should be cleaned occasionally and treated with a care product, and hardware checked and lubricated once a year. Coloured surfaces from the KALEIDO COLOR programme do not tolerate abrasive products.
Who is Artevo suited to?
| Project | Suitability |
|---|---|
| New build with large, slim windows | very good – light sashes, tall formats |
| Passivhaus with limited reveal depth | Artevo max as an 80 mm alternative |
| Renovation with funding | good, also in the standard version |
| Timber-window look in uPVC | flush sash |
| Budget project, ancillary rooms | rather over-specified |
You will find a comparison with other uPVC systems in the uPVC window profile comparison.
Artevo compared with 88 mm systems
Anyone planning a Passivhaus often ends up with 88 mm frame-depth profiles when choosing uPVC windows. According to REHAU, Artevo max achieves a Passivhaus certificate at 80 mm, because the LowE foil lowers the radiation losses in the chambers instead of extra depth. With limited reveals, that can be a decisive advantage.
Conversely: for a standard renovation without Passivhaus ambitions, the basic Artevo version is enough. The LowE variant is worthwhile mainly when a certificate or a very low Uw-value is required – in a high-efficiency new build, for example, or with many small windows with a high frame share, where every tenth of a Uf-value counts.
What to watch for
- Clarify the version: standard or Artevo max – the Uf-values differ.
- Decide the sash type: offset or flush, with effects on glass thickness and look.
- Discuss reinforcement: with very large or coloured sashes, steel may be needed.
- Check availability: not every window maker fabricates every Artevo variant.
Checklist before ordering
- Set the target Uw and, where relevant, the Passivhaus proof.
- Choose the sash shape and meeting stile (slim or standard).
- Plan the glazing build-up within the permitted range.
- Agree maximum sash dimensions with the window maker.
- Decide colour or decor and ask about effects on reinforcement.
Want to know whether Artevo is available for your project? Use our contact form or put your windows together directly in the configurator.
Frequently asked questions
Since when has REHAU Artevo existed?
By its own account, REHAU officially launched Artevo on the market on 1 July 2023. The system is based on the 80 mm platform that Synego AD and MD also use.
Does REHAU Artevo have steel reinforcement?
Artevo uses the RAU-FIPRO X material and, according to REHAU, largely dispenses with steel reinforcement. A universal reinforcement is available for sashes where needed, for example for very tall sashes.
What is Artevo max?
Artevo max is the version with a LowE foil integrated in the profile at the factory. It reduces heat radiation in the chambers and, according to REHAU, enables Uf-values down to 0.81 W/(m²K) and Passivhaus certification.
Which glass thicknesses are possible with Artevo?
REHAU quotes up to 56 mm with the offset sash and up to 72 mm with the flush sash. That also allows very thick triple-glazed and acoustic glass.
Sources
- REHAU – Revolutionäres Premium-Fenstersystem ARTEVO(opens in a new tab)
- REHAU – Passivhausstandard ab Werk durch integrierte LowE-Technologie(opens in a new tab)
- bauelemente bau – Rehau führt neues Fenstersystem Artevo offiziell ein(opens in a new tab)
- Gütegemeinschaft Kunststoff-Fensterprofilsysteme – Profilsysteme mit RAL-Gütezeichen(opens in a new tab)
- BAFA – BEG Einzelmaßnahmen Gebäudehülle(opens in a new tab)
Ready for your project?
Configure your products to measure and see the price straight away – or send us your questions.