Skip to content

Business customers only (B2B) · All prices net plus VAT

AluKun
Energy & grants

Vacuum Glazing and High-Tech Glass: Triple-Glazing Insulation in a Few Millimetres

6 minutes read

Vacuum glazing replaces the gas-filled cavities of classic double glazing with an extremely thin, almost airless gap. Because, without air, hardly any heat is carried by conduction and convection, vacuum glass reaches, according to manufacturers, an insulating effect comparable to triple glazing at only a few millimetres thick. That makes it interesting above all for windows in old and listed buildings, whose narrow glazing rebates cannot take thick triple glazing.

Vacuum glazing compared with classic sealed units

Feature Double glazing Triple glazing Vacuum glazing
Cavity one gas-filled gap two gas-filled gaps evacuated gap in the tenth-of-a-millimetre range
Thickness medium large very small
Weight medium high low
Use in old glazing rebates partly rarely often possible
Market presence existing stock standard in new builds niche product

The table describes tendencies, not fixed values. Always take specific performance figures from the declaration of performance of the product in question.

How vacuum glazing works

With ordinary double glazing, heat in the cavity is carried through the gas (conduction and convection) and by radiation. Noble gases such as argon reduce conduction, and a low-emissivity coating on the glass reduces radiation.

Vacuum glazing goes one step further: the cavity is evacuated. Without gas, heat transport by conduction and convection almost disappears; radiation is still reduced by a low-E coating. The challenges are mechanical:

  • Air pressure: The outside air pressure presses the two panes together. Tiny spacer pillars in the cavity keep them apart.
  • Edge sealing: The edge has to hold the vacuum for decades. Unlike classic sealed units with butyl and secondary sealant, special edge seals are used here.
  • Gap width: Pilkington gives a pane spacing of only 0.2 mm for Spacia, and FINEO gives 0.1 mm for its vacuum layer.

Vacuum glazing on the market: what manufacturers state

Product Manufacturer information (extract)
Pilkington Spacia Total thickness just over 6 mm, thermal insulation comparable to conventional double glazing; use in listed buildings and slim profiles, among others
FINEO Thermal insulation like triple glazing, three to four times thinner, 6 to 12 mm, up to 35 % lighter than triple glazing; expected life cycle 60 years, 20-year guarantee
FINEO Hybrid Vacuum glass combined with a further cavity, total thickness 22 to 34 mm, U-value 0.4 to 0.5 W/(m²K)

The figures come from the manufacturers and refer to the glazing (Ug), not the whole window. How Ug and Uw values relate is explained in the article Uw, Ug, Uf.

Where vacuum glazing plays to its strengths

Windows in old and listed buildings

Historic timber windows have narrow glazing rebates that only take single or thin sealed glazing. With vacuum glass, such windows can be improved markedly in energy terms without changing frames, glazing bars or proportions. Both manufacturers name exactly this use. For the other profile options for old buildings, see the article Window profiles for older buildings.

Slim profiles and low weight

If you want very narrow sightlines or light sashes, you benefit from the low weight. Lighter sashes relieve the hardware and make operation easier.

Box sash and special solutions

For box sash windows or sliding sashes with little installation space, a thin, highly insulating glass can also be the answer. With box sash windows, often only the inner sash is fitted with better glass, while the outer sash keeps its historic glazing.

Glazing-bar windows

True glass-dividing bars mean many small panes with a lot of edge seal. Thin vacuum glass makes it possible to keep the delicate bar appearance. More on the types of bar in the article Glazing bars in windows.

Limits and open questions

  • Price: Vacuum glazing is a specialist product and is generally much more expensive than standard double glazing. Obtain specific quotes.
  • The frame stays a weak spot: An old timber frame with a poor Uf-value and leaky joints limits how much the glass brings overall.
  • Funding: In Germany, the BEG individual measures require a Uw-value of no more than 0.95 W/(m²K) for windows. With a plain glass replacement in an old frame, this value is often not reached. Whether different requirements apply to listed buildings or particularly worthy-of-preservation fabric is something to clarify beforehand with the energy consultant.
  • Appearance: Ask for samples so you can judge the effect of the spacer pillars and the edge detail yourself.
  • Availability and experience: Not every window fitter works with vacuum glass. Manufacturers and glaziers with references are the right contacts.

Care and glass breakage

In everyday use, vacuum glazing hardly differs from ordinary sealed units: clean with water and a mild cleaner, and no blades or scouring agents on coated surfaces. Replacement after glass breakage is different. Because this is a specialist product, replacement should be sourced through the original glazier or manufacturer. When ordering, ask how lead time and handling of the guarantee are arranged in the event of damage, and keep the documents on glass build-up and manufacturer information together with the invoices.

Other high-tech glazing at a glance

Vacuum glass is not the only development. For new builds and refurbishments, these variants are particularly relevant:

  • Triple glazing with argon or krypton: The standard for highly insulating windows. Krypton allows narrower cavities with a similar insulating effect but costs more. When triple is worthwhile compared with double glazing is shown in the article Double or triple glazing.
  • Warm edge: Spacers made of plastic or stainless steel instead of aluminium raise the surface temperature at the glass edge and lower the risk of condensation. See Warm edge.
  • Solar-control glass: Coatings with a low g-value reduce overheating of large glass areas. More in the article Solar-control glass.
  • Acoustic and safety glass: Asymmetric build-ups and laminated safety glass improve sound insulation and burglar resistance.

A look ahead

Alongside vacuum glass, glass with switchable tint, integrated solar cells or particularly light thin-glass build-ups is being developed. Some is already in use in commercial buildings but is still rare in housing. For your purchasing decision today: choose glazing with documented performance figures from a declaration of performance that suits your frame and installation situation.

Who vacuum glazing suits

Situation Assessment
Listed house with timber windows worth keeping very interesting, check frames and rebates beforehand
Old building with slim glazing-bar windows, frame in good condition interesting, compare cost with new windows
Ordinary existing building, windows at the end of their life usually more economical: a new window with triple glazing
New build Standard triple glazing is proven and cheaper; vacuum glazing only for special design wishes

Our advice: for an old-building project, always ask for two options, upgrading the existing window with thin high-performance glass and replacing it with a new window of matching appearance. Only a direct comparison of cost, insulating effect, funding eligibility and conservation conditions shows which route makes sense.

Checklist before deciding

  1. Have the condition of frames, hardware and glazing rebate checked.
  2. Measure the rebate width: does triple glazing fit, or only a thin solution?
  3. Clarify conservation requirements.
  4. Compare quotes for vacuum glazing in the old frame and for a new window.
  5. Clarify funding eligibility with the energy consultant.

For most homes without heritage protection, a new window with triple glazing is the simpler solution. In the window configurator you put together profiles with narrow sightlines and triple glazing; for special solutions, you can reach us via the contact page.

Frequently asked questions

How thick is vacuum glazing?

Much thinner than triple glazing. Pilkington gives a total thickness of just over 6 mm for Spacia, and FINEO lists variants from 6 to 12 mm. Conventional triple glazing is several times that.

How well does vacuum glazing insulate?

Manufacturers state an insulating effect comparable to triple glazing. For its hybrid variant, in which vacuum glass is combined with a further cavity, FINEO gives a U-value of 0.4 to 0.5 W/(m²K).

Can I put vacuum glazing into my old timber windows?

That is one of the main uses, because the thin panes often fit into existing glazing rebates. A specialist firm has to check whether frame, rebate and hardware are suitable.

Is vacuum glazing eligible for funding?

In Germany, it is the measure that is funded, not the glass. Under the BEG, the Uw-value of the whole window counts; with a glass replacement in an old frame, the required value is often not reached. Have an energy consultant check this beforehand.

Sources

  1. FINEO: Vakuumglas – Produktinformationen(opens in a new tab)
  2. Pilkington Spacia – Vakuumisolierglas(opens in a new tab)
  3. Wikipedia: Isolierglas – Aufbau und Randverbund(opens in a new tab)
  4. BAFA: Technische Mindestanforderungen BEG EM (Kopie)(opens in a new tab)

Ready for your project?

Configure your products to measure and see the price straight away – or send us your questions.

Cover image: Blower Door Test at the Window: Finding Air Leaks
Energy & grants

Blower Door Test at the Window: Finding Air Leaks

Blower door test and windows: procedure under DIN EN ISO 9972, n50 limits in the German GModG and why the window connection is often the biggest weak spot.

7 minutes read

Cover image: Insulating Roller Shutter Boxes: Stop the Heat Loss
Energy & grants

Insulating Roller Shutter Boxes: Stop the Heat Loss

Insulating roller shutter boxes: why old boxes are a thermal bridge and air leak, which insulating and sealing measures help, and when new shutters are better.

6 minutes read

Cover image: Misted Double Glazing Between the Panes: What to Do
Energy & grants

Misted Double Glazing Between the Panes: What to Do

Pane misted between the glass? How to recognise a failed edge seal, why wiping does not help and when a glass replacement or a new window is worthwhile.

6 minutes read

We use strictly necessary cookies so the shop, configurator and basket work. With your consent we also use Google Analytics to measure how the site is used, and marketing signals for advertising. You can change your choice at any time in the footer. Read our privacy policy